Yamaha MD4 Owner's Manual - Page 36
Setting the Pre-Roll & Post-Roll Times, SELECT buttons to select
View all Yamaha MD4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
28 Recording & Mixing Techniques Setting the Pre-Roll & Post-Roll Times Pre-Roll and Post-Roll are used in conjunction with the Auto Punch In/Out function. Pre-Roll refers to the time before the IN point at which playback starts. Post-Roll refers to the time after the OUT point at which playback stops. The default time for both Pre-Roll and Post-Roll is 5 seconds. You can change the values independently using the PrePost Roll function, as explained below. These settings are not stored when MD4 is turned off. Pre-Roll Point Pre-Roll Time Post-Roll Point Post-Roll Time [IN] [OUT] 1. Press the [UTILITY] button and use the [√] and [®] SELECT buttons to select the PrePost Roll function. 2. Press the [ENTER] button. The display shows PreXXX5sec 3. Use the [-] and [+] DATA buttons to set the Pre-Roll time from 0 to 9 seconds. 4. Press the [ENTER] button. The display shows Post 5sec 5. Use the [-] and [+] DATA buttons to set the Post-Roll time from 0 to 9 seconds. 6. Press the [UTILITY] button to finish. MD4-Owner's Manual