Yamaha P-515 P-515 Owners Manual - Page 79
Connecting by the Accesspoint Mode
View all Yamaha P-515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Connections Connecting by the Accesspoint Mode Make sure to connect the USB wireless LAN adaptor (sold separately) to the [ ] (USB TO DEVICE) terminal, otherwise the displays for setup will not be shown. 1. Switch the instrument to the "Accesspoint Mode." Press the [FUNCTION] button repeatedly to call up the "System" menu display, then select the highlighted item in each display as illustrated below. "System" menu display "Utility" display NOTE This cannot be used to connect to the internet or another wireless LAN device. 1-1. Use the [V]/[E] buttons to select "Utility." 1-2. Press the [>] button to call up the next display. 1-3. Use the [V]/[E] buttons to select "Wireless LAN Option." 1-4. Press the [>] button to call up the next display. "Wireless LAN Option" display "Wireless LAN Mode" display 1-5. Use the [V]/[E] buttons to select "Wireless LAN Mode." 1-6. Press the [>] button to call up the next display. 1-7. Use the [V]/[E] buttons to select "Accesspoint Mode." When mode change is done successfully, "Completed" is shown in the display, operation returns to the "Wireless LAN Mode" display. 2. Set SSID, Security, Password and Channel. 2-1. From the "System" menu display, select the highlighted item in each display as illustrated below. "System" menu display "Utility" display "Wireless LAN" display 2-2. Set the SSID, Security, Password and Channel. Select and enter each value/setting in the same way as in step 3 in "Manual Setup." For the setting range for each item, refer to the table on page 104. 79 P-515 Owner's Manual