Yamaha PSR-540 Owner's Manual - Page 55

Registration Memory Registering the Panel Settings 1 Set up the panel controls as required. 2 Press the round Registration Memory button to call up the Registration Memory function. 3 While holding the [MEMORY] button, press one of the REGISTRATION MEMORY buttons: [1] through [4]. • Any data that was previously recorded in the Registration Memory location you selected will be erased and replaced by the new settings. • The Registration Memory contents will be retained even after turning the power off. See page 135 for details. In this example, the panel settings are memorized to button number 3. Recalling the Registered Panel Settings Press one of the REGISTRATION MEMORY buttons: [1] through [4]. In this example, the panel settings memorized to button number 3 are recalled. The Accompaniment Freeze function When the FREEZE function is engaged, selecting a different Registration Memory setup will not change any of the accompaniment and Voice L parameters (all other parameters will change as programmed). This allows you to use the auto accompaniment and select different Registration Memory setups, without suddenly disturbing the flow of the accompaniment. 1 Press the [FREEZE] button. The [FREEZE] lamp lights. 2 Press one of the REGISTRATION MEMORY buttons: [1] through [4]. • Registration data cannot be recalled when the One Touch Setting function is on. • Some parameters cannot be recalled depending on the selected mode. For example, you cannot recall the Voice R2/L voices in the Style Record mode and Pad Record mode even if you press the Registration Memory buttons, since only the Voice R1 voice is used in those modes. • For details about Accompaniment parameters (page 54). • The Freeze function will automatically be turned on when one of the following modes, Song, Style Record or Pad Record is engaged. In this example, only the voice parameter (other than Voice L) settings memorized to button number 3 are recalled. 55 53