Yamaha PSR-SX600 PSR-SX600 Owners Manual - Page 76
buttons to stop recording., Use the [3
![]() |
View all Yamaha PSR-SX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4 Use the [2 ] (Rec) buttons to enter recording standby. The [Play/Pause] button in the display flashes. Recordable time NOTE You can use the metronome (page 38) while recording; however, the metronome sound will not be recorded. 5 Start recording by using the [3 ] (Play/Pause) buttons, and then start your performance. The elapsed recording time is shown in the display while recording. Elapsed recording time NOTICE Never attempt to disconnect the USB flash drive or turn the power off during recording. Doing so may corrupt the USB flash drive data or the recording data. 6 After you finish your performance, use the [4 ] (Stop) buttons to stop recording. Recorded data is automatically saved to the USB flash drive as a file with the name automatically set. 7 Use the [3 ] (Play/Pause) buttons to play back the recorded performance. To see the file of the recorded performance in the File Selection display, use the [1 ] (Select&Save) buttons. NOTE The recording operation continues, even if you close the USB Audio Player display by pushing the [EXIT] button. Press the [USB AUDIO PLAYER] button to call up the USB Audio Player display again, and then stop the recording by pressing the [4 ] (Stop) button. NOTE Keep in mind that if you make a mistake in your performance, you cannot correct it by overwriting an existing file. Delete the recorded file on the File Selection display, and then record your performance again. 76 PSR-SX600 Owner's Manual
![](/manual_guide/products/yamaha-psrsx600-psrsx600-owners-manual-5fbe812/76.png)