Yamaha R-N500 Owners Manual - Page 14
PREPARATION, Connections, Connecting speakers and source components
View all Yamaha R-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PREPARATION Connections Connections Connecting speakers and source components CAUTION • Do not connect this unit or other components to the main power until all connections between components are complete. • All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "-" to "-". If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner's manual for each of your components. • Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers. Turntable Speakers A DVD player, etc. CD player, etc. Audio output GND Audio output O (digital optical) Audio output C (digital coaxial) Audio input Audio output Audio output CD recorder, etc. CD player Subwoofer Speakers B y • The PHONO jacks are designed for connecting a turntable with an MM cartridge. • Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise without the GND connection. Connecting recording devices You can connect audio recording devices to the LINE 2-3 (REC) jacks. This jack output analog audio signals selected as the input. Notes • Be sure to use the LINE 2-3 (REC) jacks only for connecting recording devices. • If you select LINE2 as the input source, the audio output of the LINE 2 (REC) jacks will be muted. If you select LINE3 as the input source, the audio output of the LINE 3 (REC) jacks will be muted. 10 En