Yamaha R-N500 Owners Manual - Page 43
Controlling external devices with the remote control, Registering the remote control code for a TV
View all Yamaha R-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Controlling external devices with the remote control Controlling external devices with the remote control You can use the unit's remote control to operate external devices (such as CD players) if you have registered the remote control code of the external device. Notes • You cannot control an external device that does not have a remote control sensor. • Ensure that the remote control ID of the external device is set to "ID1". If any other ID is selected, the remote control operations may not work properly. • If the unit's remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert new batteries and register the codes again. Registering the remote control code for a TV You can use the unit's remote control to operate a TV if you have registered its remote control code. y You can also register your TV's remote control code to the unit's input selection keys (p.40). This would allow you to use the cursor keys or numeric keys to operate the TV (this function may not be available on some TV models). SOURCE SLEEP CODE SET RECEIVER CODE SET SPEAKERS ID DIMMER A B COAX1 COAX2 OPT1 OPT2 1 2 3 4 5 6 7 8 9 0 +10 ENT TV TV INPUT TV VOL TV CH TV MUTE Numeric keys TV operation keys TV A 4 Use the numeric keys to enter the 4-digit remote control code. Once the remote control code is successfully registered, "Rem: Success" appears on the front display. If "Rem: Fail" appears on the front display, registration has failed. Repeat from Step 2. ■ TV operations Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit. INPUT TV operation keys MUTE TV VOL TV CH TV A Switches the video inputs of the TV. Mutes the audio output of the TV. Adjust the volume of the TV. Switch the channels of the TV Turns on/off the TV. 1 Refer to "LIST OF REMOTE CONTROL CODES" (end of this manual) to find your TV's remote control code. y If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. 2 Press CODE SET using a pointed object such as the tip of a ballpoint pen. Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. 3 Press TV A. ADVANCED OPERATION English 39 En