Yamaha R-N500 Owners Manual - Page 40
Network Name, Update, Max Volume, Initial Volume, AutoPowerStdby, ECO Mode, DC OUT - firmware update
View all Yamaha R-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Configuring various functions (SETUP menu) ■ Network Name Edits the network name (the unit's name on the network) displayed on other network devices. 1 Select "Network Name". SP A VOL. Network Name 2 Press ENTER to enter the name edit display. SP A VOL. R-N500 XXXXXX Network name 3 Use the cursor keys (D / E) to move the edit position and the cursor keys (B / C) to select a character. SP A VOL. R-N500 XXXXXX Initial Volume Sets the initial volume when the receiver is turned on. Off (default) Mute Sets the level to the volume level of the unit when it last entered standby mode. Sets the unit to mute the audio output. -80.0 dB to +16.5 dB (0.5 dB Sets the level to the specified volume level. increments) AutoPowerStdby Sets the amount of time for the auto-standby function. If you do not operate the unit for the specified time, the unit will automatically go into standby mode. Off (default) Does not set the unit to standby mode automatically. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. For example, when "2 hours" is selected, the unit will switch to standby mode if you do not operate it for 2 hours. y Just before the unit enters standby mode, "AutoPowerStdby" appears and then countdown starts in the front display. 4 To confirm the new name, press ENTER. 5 To exit from the menu, press SETUP. ■ Update Updates the firmware via the network. Perform Update Starts the process to update the unit's firmware. For details, see "Updating the unit's firmware via the network" (p.42). Version Displays the version of the firmware installed on the unit. ID Displays the system ID number. Max Volume Sets the maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB Default +16.5 dB ECO Mode Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit's power consumption. Off (default) Disables the eco mode. On Enables the eco mode. Notes • Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the unit is restarted. • When "ECO Mode" is set to "On", the front display may become dark. • If you want to play audio at high volume, set "ECO Mode" to "Off". DC OUT Configures the DC OUT jack setting. Power Mode Selects how to supply power to the Yamaha AV accessory connected to the DC OUT jack. Cont (default) Sync Supplies power through the DC OUT jack continuously regardless of the power state (on/ standby) of the unit. Supplies power through the DC OUT jack only when the unit is turned on. 36 En