Yamaha RX V663 Owner's Manual - Page 121
AUTO SETUP, Before AUTO SETUP, During AUTO SETUP
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
■ AUTO SETUP Before AUTO SETUP Troubleshooting Error message Connect MIC! Unplug HP! Memory Guard! During AUTO SETUP Cause Optimizer microphone is not connected. Headphones are connected. The parameters of this unit are protected. Remedy Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. Unplug the headphones. Set "MEMORY GUARD" to "OFF". See page 32 - 97 Error message Cause Remedy E-1:NO FRONT SP E-2:NO SUR SP E-3:NO PRNS SP E-4:SBR->SBL E-5:NOISY E-6:CHECK SUR. E-7:NO MIC E-8:NO SIGNAL E-9:USER CANCEL E-10:INTERNAL ERROR Front L/R channel signals are not detected. Check the front L/R speaker connections. A surround channel signal is not detected. Check the surround speaker connections. A presence channel signal is not detected. Check the presence speaker connections. Only a right surround back channel signal is detected. Background noise is too loud. Surround back speakers are connected, though surround L/R speakers are not. The optimizer microphone was unplugged during the "AUTO SETUP" procedure. The optimizer microphone does not detect test tones. The "AUTO SETUP" procedure was cancelled due to user activity. An internal error occurred. Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. Try running "AUTO SETUP" in a quiet environment. Turn off noisy electric equipment like air conditioners or move them away from the optimizer microphone. Connect surround speakers when you use surround back speakers. Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. Check the microphone setting. Check the speaker connections and placement. Run "AUTO SETUP" again. Run "AUTO SETUP" again. See page 14 14 14 14 - - 14 32 32 14 32 32 ADDITIONAL INFORMATION English 117 En