Yamaha RX V663 Owner's Manual - Page 56

USING AUDIO FEATURES Using audio features Before performing the following operations, press 5AMP on the remote control. Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. Note This operation will override the level adjustments made in "AUTO SETUP" (see page 32) and "SP LEVEL" (see page 87). 1 Press 7LEVEL on the remote control and then 8k / n repeatedly to select the speaker you want to adjust. Display Adjusted speaker FRONT L Front left speaker FRONT R Front right speaker CENTER Center speaker SUR. L Surround left speaker SUR. R Surround right speaker SBL Surround back left speaker SBR Surround back right speaker SWFR Subwoofer PRNS L Presence left speaker PRNS R Presence right speaker y • The available speaker channels differ depending on the setting of the speakers. • When the video monitor is turned on, the "LEVEL" adjustment menu appears in the video monitor. 2 Press 8l / h to adjust the speaker output level. • Press 8h to increase the value. • Press 8l to decrease the value. Control range: -10.0 dB to +10.0 dB 3 Press 7LEVEL to turn off the speaker level adjustment display. Enjoying pure hi-fi sound Use the Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When the Pure Direct mode is activated, this unit plays back the selected source with the least circuitry. Press PPURE DIRECT (or DPURE DIRECT) to turn the Pure Direct mode on or off. The PPURE DIRECT button on the front panel lights up while this unit is in the Pure Direct mode. The front panel display automatically dims. Notes • The following operations are not possible when this unit is in the Pure Direct mode: - switching the sound field program - displaying the OSD - adjusting the "SET MENU" parameters (except for level settings) - operating video functions (video conversion, etc.) • The Pure Direct mode is automatically canceled whenever this unit is turned off. y The front panel display turns on momentarily when an operation is performed. Adjusting the tonal quality Use this feature to adjust the balance of bass and treble for the front left and right speaker channels. y Speaker and headphone adjustments are stored independently. 1 Press MTONE CONTROL on the front panel repeatedly to select the high-frequency response (TREBLE) or the low-frequency response (BASS). 2 Rotate the NPROGRAM selector to adjust the high-frequency response (TREBLE) or the low-frequency response (BASS). Control range: -6 dB to +6 dB Notes • If you increase or decrease the high-frequency or the low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match. • TONE CONTROL is not effective when PURE DIRECT is selected, or when MULTI CH INPUT is selected as the input source. 52 En