Yamaha RX V663 Owner's Manual - Page 59
A1:FM 88.9MHz, Automatic station preset, Manual station preset - 7 1 stereo receiver
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
BASIC OPERATION Before performing the following operations, press 4TUNER on the remote control. ■ Automatic station preset You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) in order. 1 Rotate the RINPUT selector (or press 4TUNER) to select "TUNER" as the input source. 2 Press CBAND (or 7BAND) to select "FM" as the reception band. "FM" appears in the front panel display. 3 Press and hold FMEMORY (or 9MEMORY) for more than 3 seconds. The preset station number as well as the MEMORY and AUTO indicators flashes. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds toward higher frequencies. Flash MEMORY AUTO A1:FM 88.9MHz Flashes When automatic preset tuning is completed, the MEMORY indicator disappears. y • You can specify the preset number from which this unit stores FM stations. Press DA/B/C/D/E (or 8A-E/CAT. l / h) and then EPRESET/TUNING/CH l / h (or 8PRESET/CH k / n) repeatedly after you perform step 3 to select the preset station number under which the first station will be stored. • To cancel the automatic station preset, press FMEMORY (or 9MEMORY) again. Notes • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. • If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations and copy the stored stations to the rest preset station numbers. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength or an AM radio station, tune into it manually and store it as described in "Manual station preset" below. FM/AM tuning ■ Manual station preset Use this feature to store the AM or FM stations with weak signals manually. 1 Tune into a station. See page 53 for tuning instructions. 2 Press FMEMORY (or 9MEMORY). The MEMORY indicator flashes in the front panel display for approximately 30 seconds. MEMORY Flashes y To cancel the preset memory mode, press FMEMORY (or 9MEMORY) again. 3 Press EPRESET/TUNING/CH l / h (or 8PRESET/CH k / n) repeatedly to select a preset station group and number (A1 to E8) while the MEMORY indicator is flashing. • Press Eh (or 8k) to select a higher preset station group and number. • Press El (or 8n) to select a lower preset station group and number. Flashes MEMORY A1:FM 88.9MHz The displayed station has been stored as A1. y You can select the preset station group (A to E) by pressing DA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly. 4 Press FMEMORY (or 9MEMORY) while the MEMORY indicator is flashing. The station band and frequency appear in the front panel display with the preset station group and number you have selected. The MEMORY indicator disappears from the front panel display. Notes • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. • The reception mode (stereo or monaural) is stored along with the station frequency. English 55 En