Yamaha RX V663 Owner's Manual - Page 44
Creating your original SCENE templates, Rename the SCENE templates - turns off
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Selecting the SCENE templates Creating your original SCENE templates You can create your original SCENE templates for each SCENE button. You can refer to the preset 18 SCENE templates to create the original SCENE templates. Select the desired SCENE template Create an original SCENE template 3 Press 8k / n to select the desired parameter of the SCENE template and then 8l / h to select the desired value of the selected parameter. You can adjust the following parameters for a SCENE template: • INPUT: The input source component. • MODE: The active sound field programs, "Straight" or "Pure Direct" mode. SCENE : DVD Viewing INPUT : DVD SCENE : DVD Viewing [ p [ SCENE template library (Image) 1 Assign the SCENE template to the SCENE button 1 Turn on the video monitor connected to this unit. 2 Press and hold the desired 6SCENE button for 3 seconds. The SCENE template customizing screen appears on the video monitor. SCENE1 .p DVD Viewing [ INPUT: DVD MODE: STRAIGHT [ENTER]:Rename [SCENE1]:SET [RETURN]:EXIT Note When the SCENE template you want to customize is not assigned to any of the 6SCENE buttons, press 8l / h repeatedly to recall the desired SCENE template on the menu screen. 4 Press the 6SCENE button again to confirm the edit. y An asterisk mark (*) appears by the name of the original SCENE template. Notes • Once the desired SCENE templates are assigned to the corresponding 6SCENE buttons, you need to set the input source of the SCENE template on the remote control. See page 41 for details. • You can create a customized SCENE template for each SCENE button, and if you create another customized SCENE template, this unit overwrites the old customized SCENE template with the new one. • The newly created template is only available for the assigned SCENE button. ■ Rename the SCENE templates Select the name of the SCENE template at step 3 of "Creating your original SCENE templates" and then press 8ENTER. SCENE1 RENAME -DVD Viewing [ ]/[ ]:Character [p]/[[]:Position [ENTER]:SET [RETURN]:CANCEL • Press 8k / n to select the desired character. • Press 8l / h to place an "_" (underscore) under the space or the desired character. • Press 9RETURN to cancel the new name. • Press 8ENTER to confirm the new name. 40 En