Yamaha RX V663 Owner's Manual - Page 31
Connecting the FM and AM antennas
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PREPARATION Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals. In general, these antennas should provide sufficient signal strength. Notes • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. Indoor FM antenna (supplied) AM loop antenna (supplied) DV SIRIUS XM 1 OPT ANTENNA F Z AM GND FM 75Ω UNBAL. REMOTE TRIGGER OUT Outdoor AM antenna Use a 5 to 10 m (16 to 33 ft) vinyl-covered wire extended outdoors from a window. Connections Connecting the wire of the AM loop antenna Open the lever Insert Close the lever y The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal. Assembling the supplied AM loop antenna Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. English 27 En