Yamaha RX V663 Owner's Manual - Page 99

[ p Start pairing START PAIRING Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with your Bluetooth component. For details about the pairing, refer to "Pairing the Bluetooth™ adapter and your Bluetooth™ component" on page 70. To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting. 1 Press 8ENTER to start pairing. The connected Bluetooth adapter starts searching Bluetooth components. "Searching..." appears in the video monitor. 2 Check that the Bluetooth component detects the Bluetooth adapter. If the Bluetooth component the Bluetooth adapter, "YBA-10 YAMAHA" (example) appears in the Bluetooth device list. 3 Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key "0000" on the Bluetooth component. Once this unit completes the pairing successfully, "Pairing completed" appears. y To cancel the pairing, press 9RETURN to exit from "START PAIRING". 4 Press 9RETURN to exit from "START PAIRING". Notes • If the connected Bluetooth adapter cannot find any Bluetooth components, "Not found" appears. • If a Bluetooth adapter is not connected to this unit, "No Bluetooth Adapter" appears. Multi-channel input BGV BGV Use this feature to select the video source played in the background of the sources input at the MULTI CH INPUT jacks. M) MULTI CH INPUT RENAME VOL. TRIM;;;;;0.0dB . BGV;;;;;;;;;;;;LAST INPUT CH;;;;;;;;6CH [ ]/[ ]: Up/Down [ENTER]: Select Customizing this unit (MANUAL SETUP) Choice Functions LAST Automatically selects the last selected video source as the background video source. DVD, DTV/ CBL, DVR, VCR, V-AUX Selects the corresponding input source as the background video source. OFF Does not play the video source in the background. Input channels INPUT CH Use this setting to select the number of channels input from an external decoder (see page 25). Choices: 6CH, 8CH M) MULTI CH INPUT RENAME VOL. TRIM;;;;;0.0dB BGV;;;;;;;;;;;;LAST . INPUT CH;;;;;;;;6CH [ ]/[ ]: Up/Down [ENTER]: Select p [ If the connected component outputs discrete 6-channel audio signals. Select "6CH". If the connected component outputs discrete 8-channel audio signals. Select "8CH". Also set "FRONT" (see below) to the analog audio jacks at which the front left and right channel signals output from the connected component are input. Front left and right channels input jack FRONT If you selected "8CH" in "INPUT CH", you can select the analog audio jacks at which the front left and right channel signals output from the connected external decoder is input. Choices: CD, MD/CD-R, DVD, DTV/CBL, DVR, VCR, V-AUX M) MULTI CH INPUT RENAME VOL. TRIM;;;;;0.0dB BGV;;;;;;;;;;;;LAST INPUT CH;;;;;;;;8CH . FRONT;;;;;;;;;;;DVD [ ]/[ ]: Up/Down [ENTER]: Select p [ Note "FRONT" parameter appears only when you set "INPUT CH" to "8CH". ADVANCED OPERATION English 95 En