Yamaha RX V663 Owner's Manual - Page 89
BASIC MENU, Extra speakers assignment, LFE/bass out, LFE signals output - subwoofer setup
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
1 BASIC MENU Use this feature to manually adjust the basic speaker settings. Most of the "BASIC MENU" parameters are set automatically when you run the automatic setup. 1 BASIC MENU . A)SPEAKER SET B)SP LEVEL C)SP DISTANCE D)TEST TONE [ ]/[ ]: Up/Down [ENTER]: Enter p [ y Set "TEST TONE" to "ON" to output the test tone for the "SPEAKER SET", "SP LEVEL" and "SP DISTANCE". ■ Speaker settings A)SPEAKER SET y To select the desired parameter, press 8k / n repeatedly. Extra speakers assignment EXTRA SP ASSIGN Selects the function of the speakers connected to the EXTRA SP terminals. XA)SPEAKER SET X X EXTRA SP ASSIGN X ZONE2 >FRONT B X ZONE B PRESENCE X NONE X X X p [ XXXX[ZO]N/E[2]S:EUTp/DownXXXXX XXXX[p]/[N[o]t:AEvnatielraXbXlXeXXXX X Choice ZONE2 FRONT B ZONE B PRESENCE NONE Descriptions Select this setting when you use the Zone 2 speakers (see page 104). Select this setting when you use another front speaker system in the main zone (see page 43). Select this setting when you use another front speaker system in another room (see page 43). Select this setting when you use the presence speakers (see page 13). Select this setting when you do not use the EXTRA SP terminals. Customizing this unit (MANUAL SETUP) LFE/bass out LFE/BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. A)SPEAKER SET LFE/BASS OUT SWFR FRONT >BOTH LFE signals output Choice Subwoofer(s) and speakers Subwoofer(s) Front speakers Other speakers BOTH Output No output No output SWFR Output No output No output FRONT No output Output No output Low-frequency signals output Choice Subwoofer(s) and speakers Subwoofer(s) Front speakers Other speakers BOTH *1 *2 *3 SWFR *4 *3 *3 FRONT No output *1 *3 *1 Output(s) the low-frequency signals of the front channels and other speakers set to "SMALL". *2 Always output the low-frequency signals of the front channels. *3 Output the low-frequency signals if the speakers are set to "LARGE". *4 Outputs the low-frequency signals of the speakers set to "SMALL" or "NONE". Notes • This parameter shares the value with the "EXTRA SP ASSIGN" parameter in "AUTO SETUP" (see page 33). • If you select "ON" in "BI-AMP" (see page 109), you cannot select "PRESENCE" or "ZONE2" in "EXTRA SP ASSIGN". • After changing the "EXTRA SP ASSIGN" setting, carry out "AUTO SETUP" again (see page 32). ADVANCED OPERATION English 85 En