Yamaha SWR2311P-10G SWR2311P-10G Owners Manual - Page 19

English Controls and Connectors LAN ports Left indicator Right indicator Error information Unlit Unlit Normal Flashing (orange) Unlit A loop was detected. The port has been blocked or shut down. Lit (orange) Unlit A fault has occurred in the device receiving power, and power is not being supplied. Unlit Flashing (orange) Because the maximum total electrical power that this unit can supply has been exceeded, power supply to this port was stopped. Since the total supplied electrical power has exceeded the safety margin, it is not possible to add more devices that receive electrical power. *1 Unlit Lit (orange) Power supply is suspended because the power output at the port has exceeded the maximum power supply allowed per port. The maximum power supply allowed per port varies depending on the power consumption class of the connected powered device. *1 This unit can supply a total of 240W. For details on the safety margin, refer to the technical documentation of the SWR2311P-10G. SFP ports Left indicator Status Unlit Normal Flashing (orange) A loop or an SFP optical input level abnormality was detected. The right indicator is unlit. For details, refer to the page for this unit on the Yamaha Pro Audio website. http://www.yamaha.com/proaudio/ NOTE • The error causes can be determined by using the show error port-led command. • You can forcibly reset the error status by long-pressing (three seconds) the MODE button. • When all errors are cleared, or when the error status is forcibly reset by long-pressing the MODE button, the unit automatically returns to the initial display mode. ■ OFF mode Turns off the indicators of the LAN ports and SFP ports. SWR2311P-10G Owner's Manual 19