Yamaha SWR2311P-10G SWR2311P-10G Owners Manual - Page 23
illustration at right., Align the unit with the mounting accessory
View all Yamaha SWR2311P-10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Installation on a wall or ceiling Wall installation methods (two types) The SWR2311P-10G can be installed on a wall in the following two ways. Warning Do not install with the LAN ports facing upward or downward. Doing so could cause fire or malfunctions. LAN port side LAN port side 2. Provisionally attach four commercially available screws to the locations that you marked in step 1. At this time, leave approximately 2 mm between the head of the screw and the surface of the wall, allowing room for the mounting accessory to engage the screws. (illustration at right) Approximately 2 mm Warning You must use screws that are appropriate for the material of the wall. If the unit falls, injury or damage might occur. 3. Align the unit with the mounting accessory (illustration at right). Notice If the supplied feet have already been attached to the unit, remove them. SWR2311P-10G Owner's Manual 23