Yamaha SWR2311P-10G SWR2311P-10G Owners Manual - Page 27

English Settings ■ Logging in from a computer connected to the CONSOLE port 1. Using a console cable, connect this unit to the computer. Connect the computer to the CONSOLE port of this unit using a USB cable or an RJ-45/DB9 console cable. Notice • The LAN ports and the RJ-45 CONSOLE port all use the same 8-pin connector. If you connect these wrongly, hardware damage or malfunction might occur. Take care when making connections. • If you use the mini-USB CONSOLE port, do not use a USB hub. If multiple Yamaha switches are connected to one computer, the COM port numbers assigned to the connection might be inadvertently exchanged. Take care that you are not changing the settings of an unintended unit. 2. Check the power supply of this unit. If this unit is not powered-on, turn on the power as described in "Connecting the power cord" (page 30). When this unit powers-on and the command line is usable, a startup message appears in the console screen of the computer. If the power is already on, a startup message does not appear. SWR2311P-10G Rev.2.02.01 (Mon Sep 4 16:28:06 2018) Copyright (c) 2018 Yamaha Corporation. All Rights Reserved. 3. Press the key. The system waits for a user name to be entered. If a user name has already been specified, enter the user name. When the unit is shipped from the factory, a user name has not been specified, so it need not be entered. Username: 4. Press the key. The system waits for a password to be entered. If a password has already been specified, enter the password. When the unit is shipped from the factory, a password has not been specified, so it need not be entered. Password: 5. Press the key. If password authentication is successful, the command prompt appears, allowing you to enter commands. SWR2311P> For details on the commands, refer to the command reference. SWR2311P-10G Owner's Manual 27