Yamaha SWR2311P-10G SWR2311P-10G Owners Manual - Page 29
Removing an SFP module
View all Yamaha SWR2311P-10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English 3. To the connector, connect a fiber optic cable that is suitable for each module. Connections Connector Fiber optic cable ■ Removing an SFP module Secure this unit so that it will not move, and while grasping the lever of the SFP module, pull it slowly toward yourself to remove the module from the SFP port. NOTE For details on installation, removal, and points of caution, refer to the "SFP-SWRG-LX SFPSWRG-SX Owner's Manual" included with the SFP module. 1. Detach the fiber optic cable. Connector 2. If the SFP module is connected to the upper row of ports, lower the SFP module's lever. If it is connected to the lower row of ports, raise the lever. Fiber optic cable Lever Caution Do not look into the optical emitter when the SFP module is installed. The separately sold SFP modules are class 1 laser devices. They may emit laser beams invisible to the eye. If the laser beam enters your eye, your eyesight might be damaged. 3. Grasp the lever and pull out the SFP module. NOTE Since this unit supports hot-swapping, an SFP module can be removed without turning the power off. SWR2311P-10G Owner's Manual 29