Yamaha SWR2311P-10G SWR2311P-10G Owners Manual - Page 24
SWR2311P-10G., Install two commercially available screws in the fastening screw holes two
View all Yamaha SWR2311P-10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation on a wall or ceiling 4. Using four screws included with the mounting accessory, attach it to the SWR2311P-10G. Fasten it securely. Warning • Use only the specified screws that were included. If the unit falls, injury or damage might occur. This could also cause electric shock or malfunctions. • Take care when letting your hand or finger contact the corners of the mounting accessory. Inattention might cause injury. Notice The screw holes to use are stamped with a "C" on the mounting accessory. The screws to use are the small black M3 × 4 screws for the metal chassis. 5. Engage the assembled mounting accessory onto the commercially available screws that you provisionally attached in step 2, and slide it to the side. Warning Do not drop the unit. If the unit falls, injury or damage might occur. Notice When installing the SWR2311P-10G, engage the mounting accessory onto the screws that you provisionally attached in step 2, and slide it either to the left or the right. [Installing in left horizontal orientation] [Installing in right horizontal orientation] Screw hole for fastening (step 7) Screw hole for fastening (step 7) Screw hole for fastening (step 7) Screw hole for fastening (step 7) 6. Further tighten the commercially available screws that you provisionally attached in step 2, fastening the mounting accessory. 7. Install two commercially available screws in the fastening screw holes (two locations) of the mounting accessory. Warning You must use screws that are appropriate for the material of the wall. If the unit falls, injury or damage might occur. 24 SWR2311P-10G Owner's Manual