Yamaha YSP-2700 Owners Manual - Page 18
Installing the stands, Removing the stands
![]() |
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
123456 Installing the stands If the center unit does not sit high enough, attach the stands supplied with the unit to the center unit to increase the height at which it sits. 1 Remove the seal from the stand. Seal Install the left and right stands. 2 Align the protrusions on the stand with, and insert them into, the holes on the rear panel. Protrusion ❑ Removing the stands Pull the stands straight out. Hole Press firmly. PREPARATIONS ➤ a Installation En 18
![](/manual_guide/products/yamaha-ysp2700-owners-manual-cd11c9d/18.png)
PREPARATIONS
➤
a
Installation
En
18
If the center unit does not sit high enough, attach the stands supplied with the unit to
the center unit to increase the height at which it sits.
1
Remove the seal from the stand.
2
Align the protrusions on the stand with, and insert them into, the
holes on the rear panel.
Install the left and right stands.
❑
Removing the stands
Pull the stands straight out.
Installing the stands
Seal
Protrusion
Hole
Press firmly.
1
2
3
4
5
6