Yamaha YSP-2700 Owners Manual - Page 97
and/or audio from a playback, device are not output to the TV. - sound bar
![]() |
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Problem Cause Remedy See page Sound from the subwoofer is intermittent. Wired Wireless Cables used to connect the subwoofer to the center unit are not connected Connect the cables firmly. firmly. 29 Wireless communication conditions are not good, and the center unit and Move the subwoofer closer to the center unit. the subwoofer are not connected steadily. If the problem persists, move the subwoofer to a location where its STATUS - indicator steadily glows green. If there are obstacles such as metal furniture obstructing communication between the center unit and the subwoofer, rearrange the furniture and the - subwoofer. If there are devices such as microwave ovens or wireless network devices that emit electromagnetic waves, move the center unit and the subwoofer - away from these devices. The image is not displayed on TV The HDMI cable is not securely connected. screen. 4K MODE is not properly configured. Connect the HDMI cable properly. Select MODE 1 or MODE 2 in accordance with the 4K signal format. 24, 25 90 Menu screen of this unit is not displayed. The input switch of TV is not set correctly. Set the TV's input source to this unit. 30 A digital or high-frequency equipment produces noises. The unit may be placed close to digital equipment or high-frequency equipment. Move the equipment away from the unit. - The HDMI control function does not work properly. "HDMI Control" is set to "Off". The HDMI control function is disabled on your TV. Set "HDMI Control" to "On". 80 Refer to documentation supplied with your TV and check the setting. - The number of the connected HDMI devices exceeds the limit. Disconnect some of the HDMI devices. - Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are connected to the TV or a playback device with an HDMI cable. Connect only this unit to the TV or a playback device for use as an amplifier. - When the unit is turned off, video "HDMI Control" is set to "Off". Set "HDMI Control" to "On". and/or audio from a playback 25 device are not output to the TV. Sound beams for the front "Front" of "Channel Out" is set to "Stereo". Set to "Beam" or "Mix". channels cannot be adjusted 75 manually. Audio delay control function is not effective even "Audio Delay" is set to "AUTO". The TV does not support the audio delay auto adjustment feature. Adjust timing of sound output manually from "Audio Delay" in the option menu. 88 "Disable" appears in the front The key is unable to function in the current status of the unit. panel display after key operation. - APPENDIX ➤ Troubleshooting En 97
![](/manual_guide/products/yamaha-ysp2700-owners-manual-cd11c9d/97.png)