Yamaha YSP-2700 Owners Manual - Page 42

-channel playback (stereo playback mode)

Page 42 highlights

/ SURROUND STEREO TARGET 2-channel playback (stereo playback mode) 2-channel stereo playback using the right front and left front channels is enabled. When multi-channel audio signals are input, they are down-mixed to 2 channels. 1 Press the STEREO key to switch to stereo playback mode. For clear sound at a distance Delivering sound to a specified location (target playback mode) Target playback mode outputs sound beams from a single channel for optimal listening from a specific position. Refer to the illustrations below. For listening at low volumes, such as at night Play an input source, and adjust the beam angle. 1 Press the TARGET key. 2 Use the W/X key to adjust beam angle. The angle to the left increases by 2 degrees each time the W key is pressed; the angle to the right increases by 2 degrees each time the X key is pressed. A maximum angle of 90 degrees in either direction is possible. Beam angle adjusted 16 degrees to the left TARGET L16 Disabling target playback mode Press the SURROUND key or STEREO key to turn target playback mode off. • The CINEMA DSP programs are not enabled in target playback mode. • Bass output is controlled to prevent sounds from spreading in other directions. PLAYBACK ➤ Enjoying sound based on your preference En 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

PLAYBACK
Enjoying sound based on your preference
En
42
2-channel playback (stereo playback mode)
2-channel stereo playback using the right front and left front
channels is enabled. When multi-channel audio signals are input,
they are down-mixed to 2 channels.
1
Press the STEREO key to switch to stereo playback
mode.
Delivering sound to a specified location
(target playback mode)
Target playback mode outputs sound beams from a single channel
for optimal listening from a specific position.
Refer to the illustrations below.
Play an input source, and adjust the beam angle.
1
Press the TARGET key.
2
Use the
W
/
X
key to adjust beam angle.
The angle to the left increases by 2 degrees each time the
W
key is pressed; the angle to the right increases by 2
degrees each time the
X
key is pressed.
A maximum angle of 90 degrees in either direction is
possible.
Disabling target playback mode
Press the SURROUND key or STEREO key to turn target playback
mode off.
The CINEMA DSP programs are not enabled in target playback mode.
Bass output is controlled to prevent sounds from spreading in other directions.
For listening at low volumes, such as at night
For clear sound at a distance
TARGET L16
Beam angle adjusted 16 degrees to the left
S
URROUND
S
TEREO
TARGET
³
/
´