Yamaha YSP-2700 Owners Manual - Page 34
Press the ENTER key to start the AUTO SETUP, procedure and then leave the room within 10, seconds.
![]() |
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
123456 4 Press the ENTER key to start the AUTO SETUP procedure and then leave the room within 10 seconds. 5 Press the ENTER key. The measurement results are applied and saved in the unit. SYSTEM MEMORY ENTER RETURN ( ) The screen changes automatically as measurement progresses. If the AUTO SETUP procedure is complete, this unit rings the chimes. • The AUTO SETUP procedure takes about 3 minutes. • To cancel the AUTO SETUP procedure after it is started, or if you do not want to apply the results, press the RETURN ( ) key. • If an error occurs, an error buzzer sounds and an error message is displayed. For details on error messages, see "If an error message is displayed" (p. 36). • You can save several measurement results by pressing the SYSTEM MEMORY 1, 2, or 3 key. When the SYSTEM MEMORY 1 key is pressed, "M1 Saving" is displayed, and settings are saved. • If ambient noise is picked up after measurement begins, an error message is displayed in the "AUTO SETUP COMPLETE" screen prompting you to begin measurement again. Press the ENTER key to exit the error message screen, and begin measurement again. • See page 46 for more information on the system memory function. 6 Remove the IntelliBeam microphone. The "AUTO SETUP COMPLETE" screen closes. The IntelliBeam microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). INTELLIBEAM MIC PREPARATIONS ➤ f Initial settings En 34
![](/manual_guide/products/yamaha-ysp2700-owners-manual-cd11c9d/34.png)