Yamaha YSP-2700 Owners Manual - Page 24
Connecting a TV, TVs that support Audio Return Channel ARC
![]() |
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
123456 b Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. • Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is recommended to prevent degradation of signal quality. • For playback of 3D and 4K video content, use a high-speed HDMI cable. • This unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the unit to the HDMI input jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV. • To play 4K (4:4:4) video content, set "4K MODE" in advanced setup to "MODE 1" (p. 90). TVs that support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied). HDMI OUT (ARC) jack The unit (rear) OUT (ARC) HDMI ARC-compatible HDMI input HDMI (ARC) HDMI INTELLIBEAM SYSTEM SUBWOOFER MIC CONNECTOR OUT R AUX1 L AUX2 TV NETWORK OUT (ARC) HDMI IN 1 IN 2 IN 3 UPDATE ONLY TV When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI control function (p. 80). What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV. TVs that do not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied) and an optical digital audio cable. The unit (rear) HDMI OUT (ARC) jack INTELLIBEAM SYSTEM SUBWOOFER MIC CONNECTOR OUT R AUX1 L AUX2 TV NETWORK OUT (ARC) HDMI IN 1 IN 2 OUT (ARC) IN 3 UPDATE ONLY HDMI HDMI input HDMI HDMI O TV TV input jack OPTICAL O Audio output TV (optical digital) 1. Remove the cap 2. Check the direction of the plug • Use an ARC-compatible HDMI cable. • If the TV has no optical jack Connect the audio output jack on the TV to the AUX1 (analog) input jacks or AUX2 (coaxial digital) input jack on the unit, and set "TV Input" in the setup menu to "Analog [AUX 1]" or "Coaxial [AUX 2]" accordingly (p. 80). TV audio can be played through the unit by pressing the TV key on the remote control. PREPARATIONS ➤ b Connecting a TV En 24
![](/manual_guide/products/yamaha-ysp2700-owners-manual-cd11c9d/24.png)