Yamaha YSP-2700 Owners Manual - Page 90

Advanced setup list Menu TURN ON VOLUME MAX VOLUME INPUT LOCK PANEL LOCK IR INPUT POWER AC ON STANDBY MEMORY PROTECT YRB FL YRB FR YRB SL YRB SR AUTO POWER STANDBY NOTICE OF NEW FW 4K MODE Settings/Adjustable range Description OFF (Not set) (default), 1 to 70 Set the initial volume level when the power of this unit is turned on. When set to "OFF", volume level is the same as when this unit is turned off. 1 to 99, MAX (Maximum) (default) Set the maximum volume level so that this unit will not output sound beyond the limited volume level. ON (INPUT key operation is disabled) OFF (INPUT key operation is enabled) (default) Select whether or not to enable the INPUT key on the unit. ON (Key operation on the unit is disabled) OFF (Key operation on the unit is enabled) (default) Select whether or not to enable key operations on the unit (except the advanced setup operations). ON (Enables power-on) OFF (Disables power-on) (default) Select whether or not to automatically turn on this unit by pressing an input selector key on the remote control when the unit is turned off. ON (Enters standby mode) (default) OFF (Restores the state before power was lost) Set this unit's power to off when the AC power is recovered after the power to this unit was lost temporally (disconnect the AC power plug from the wall outlet, power outage, etc.). ON (Protect is performed) OFF (Protect is not performed) (default) Protect settings stored in system memory, and Internet radio stations registered with the unit. YES (The reflection board is used) NO (The reflection board is not used) (default) Use the YRB-100 sound reflection board for the front left channel. Refer to page 103 for details of YRB-100. YES (The reflection board is used) NO (The reflection board is not used) (default) Use the YRB-100 sound reflection board for the front right channel. Refer to page 103 for details of YRB-100. YES (The reflection board is used) NO (The reflection board is not used) (default) Use the YRB-100 sound reflection board for the surround left channel. Refer to page 103 for details of YRB-100. YES (The reflection board is used) NO (The reflection board is not used) (default) Use the YRB-100 sound reflection board for the surround right channel. Refer to page 103 for details of YRB-100. ON (This unit turns off automatically) (default setting for U.K. and Europe models) OFF (This unit does not turn off automatically) (default setting other than U.K. and Europe models) When set to "ON", this unit turns off automatically in any of the following situations: • Audio is coming from the selected input source, but no operations have been performed for 8 hours or more. • HDMI1- 3, Bluetooth or NET is selected as the input source, but no audio has been input to the unit or no operations have been performed with the unit for more than 20 minutes. ON (Notify) (default) OFF (Do not notify) Notifications will not be displayed on the TV screen when updates for the unit's firmware are provided via the network. MODE 11) Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select "MODE 2". MODE 2 (default) Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format. 1) When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps. SETTINGS ➤ Advanced setup En 90