Yamaha YSP-2700 Owners Manual - Page 92
Updating the unit’s firmware, Using “Network Update” in the setup menu to update firmware
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
/ ENTER SETUP ( ) RETURN ( ) Updating the unit's firmware New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. The unit's firmware can be updated as follows. • Update firmware from "Network Update" in the setup menu. • Update firmware by connecting a USB flash drive to which the unit's firmware update has been saved (p. 93). • Update firmware using the dedicated MusicCast CONTROLLER app installed on a mobile device. Follow MusicCast CONTROLLER guides to operate the app and update the firmware. Notes • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed). • If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the network connection. In this case, update the firmware using the USB flash drive (p. 93). • To perform the following procedure, your TV must be connected to the unit via HDMI. • For details on update, visit the Yamaha website. Using "Network Update" in the setup menu to update firmware When the unit is turned on for the first time after a new version of the unit's firmware has been released, a message indicating that a firmware update is available will be displayed on the TV screen. Network Update New firmware available. You can start the update from the "Setup Menu" . It takes about 20 min. to update firmware. [SETUP] : Setup Menu [RETURN] : Cancel • To update the firmware later, press the RETURN ( ) key when the "Network Update" screen is displayed on the TV screen. 1 Press the SETUP ( ) key. 2 Use the S/T keys to select "Network", and then press the ENTER key. 3 Use the S/T keys to select "Network Update", and then press the ENTER key. SETTINGS ➤ Updating the unit's firmware En 92