Yamaha YSP-2700 Owners Manual - Page 99
Remote control, heard or
View all Yamaha YSP-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Problem Cause Transmitting Cannot make the unit connected to the Bluetooth device. "Bluetooth" is set to "Off". "Transmission" is set to "Off". Another Bluetooth device is connected. The device does not support A2DP. The unit and device are too far apart. No sound is heard or the sound is intermittent via the Bluetooth device. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby. The device is not set to receive Bluetooth audio signals from the unit. The device's volume is set to minimum. The sound to be transmitted is not playing. The unit and device are too far apart. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby. The Bluetooth connection of the unit with the device is disconnected. Attempted to establish a connection during playback with AirPlay. Remedy See page Set it to "On". 81 Set it to "On". 81 Terminate the current Bluetooth connection, and connect to the device to which audio should be transmitted. 47, 49 Connect to a Bluetooth audio device that supports A2DP. 109 Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit and connect the device to this unit. 47, 49 Move this unit away from the device that is emitting radio frequency signals. - Check that the Bluetooth function of the device is set properly. Turn up the volume level on the device. Play audio on the device selected with the input selector key. Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit. Move this unit away from the device that is emitting radio frequency signals. - - 49 47, 49 - Perform Bluetooth connection operations again. Playback with AirPlay cannot be transmitted. Terminate AirPlay playback and try again to establish a connection. 49 49, 66 Remote control Problem Cause Remedy The remote control does not work The wrong distance or angle. and/or function properly. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is Reposition this unit. striking the remote control sensor of this unit. The batteries are weak. Replace all batteries. See page 7 - 7 APPENDIX ➤ Troubleshooting En 99