ZyXEL NBG5615 User Guide - Page 104
Advanced WAN Screen
View all ZyXEL NBG5615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 11 WAN 11.5 Advanced WAN Screen To change your NBG5615's advanced WAN settings, click Network > WAN > Advanced. The screen appears as shown. Figure 56 Network > WAN > Advanced The following table describes the labels in this screen. Table 35 Network > WAN > Advanced LABEL Multicast Setup Multicast DESCRIPTION Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the WAN to the LAN. Select None to disable this feature. This may cause incoming traffic to be dropped or sent to all connected network devices. Auto-Subnet Configuration Enable Auto-IPChange mode Select this option to have the NBG5615 change its LAN IP address to 10.0.0.1 or 192.168.1.1 accordingly when the NBG5615 gets a dynamic WAN IP address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1. Apply Cancel The NAT, DHCP server and firewall functions on the NBG5615 are still available in this mode. Click Apply to save your changes back to the NBG5615. Click Cancel to begin configuring this screen afresh. 104 NBG5615 User's Guide