ZyXEL NBG5615 User Guide - Page 69
Navigation Panel, 8.5 LAN Screen
View all ZyXEL NBG5615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 8 Access Point Mode Table 27 Status Screen: Access Point Mode (continued) LABEL Interface Status Interface Status DESCRIPTION This displays the NBG5615 port types. The port types are: LAN and WLAN. For the LAN ports, this field displays Down (line is down) or Up (line is up or connected). Rate For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or Down when the 2.4G/5G WLAN is disabled. For the LAN ports, this displays the port speed and duplex setting or N/A when the line is disconnected. For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/ 5GHz WLAN is enabled and N/A when the WLAN is disabled. 8.4.1 Navigation Panel Use the menu in the navigation panel to configure NBG5615 features in Access Point Mode. Figure 42 Menu: Access Point Mode Refer to Table 26 on page 61 for descriptions of the labels shown in the navigation panel. 8.5 LAN Screen Use this section to configure your LAN settings while in Access Point Mode. Click Network > LAN to see the screen below. Note: If you change the IP address of the NBG5615 in the screen below, you will need to log into the NBG5615 again using the new IP address. NBG5615 User's Guide 69