ZyXEL NBG5615 User Guide - Page 121
MAC Filter Screen
View all ZyXEL NBG5615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 12 Wireless LAN Table 43 Network > Wireless LAN 2.4G/5G > More AP: Edit (continued) LABEL DESCRIPTION Enable Bandwidth Management for Guest WLAN Select this to turn on bandwidth management for the Guest WLAN network. Maximum Bandwidth Enter a number to specify maximum bandwidth the Guest WLAN network can use. Security Mode Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 12.3 on page 112 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Apply Cancel Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Click Apply to save your changes back to the NBG5615. Click Cancel to reload the previous configuration for this screen. 12.5 MAC Filter Screen The MAC filter screen allows you to configure the NBG5615 to give exclusive access to devices (Allow) or exclude devices from accessing the NBG5615 (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen. To change your NBG5615's MAC filter settings, click Network > Wireless LAN 2.4G/5G > MAC Filter. The screen appears as shown. NBG5615 User's Guide 121