ZyXEL NBG5615 User Guide - Page 199
Restart Screen, 24.9 Language Screen
View all ZyXEL NBG5615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Chapter 24 Maintenance Table 82 Maintenance > Backup/Restore (continued) LABEL DESCRIPTION Upload Click Upload to begin the upload process. Reset Note: Do not turn off the NBG5615 while configuration file upload is in progress. After you see a "configuration upload successful" screen, you must then wait one minute before logging into the NBG5615 again. The NBG5615 automatically restarts in this time causing a temporary network disconnect. If you see an error screen, click Back to return to the Backup/Restore screen. Pressing the Reset button in this section clears all user-entered configuration information and returns the NBG5615 to its factory defaults. You can also press the RESET button on the rear panel to reset the factory defaults of your NBG5615. Refer to the chapter about introducing the Web Configurator for more information on the RESET button. Note: If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NBG5615 IP address (192.168.1.1). See Appendix B on page 221 for details on how to set up your computer's IP address. 24.8 Restart Screen System restart allows you to reboot the NBG5615 without turning the power off. Click Maintenance > Restart to open the following screen. Figure 126 Maintenance > Restart Click Restart to have the NBG5615 reboot. This does not affect the NBG5615's configuration. 24.9 Language Screen Use this screen to change the language for the Web Configurator. Select the language you prefer and click Apply. The Web Configurator language changes after a while without restarting the NBG5615. NBG5615 User's Guide 199