ZyXEL P-1100 User Guide - Page 17
Front Panel LEDs and Back Panel Ports
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Prestige 1100 Internet Access Router DHCP Support DHCP (Dynamic Host Configuration Protocol) allows you to dynamically and automatically assign IP address to hosts on your network. Data Compression Your Prestige incorporates Stac data compression to speed up data transfer. Stac is the de facto standard of data compression over PPP links. 1.3 Front Panel LEDs and Back Panel Ports Figure 1-2 Prestige 1100 Front Panel 1.3.1 Front Panel LEDs The LED lights on the front panel indicate the operational status of your Prestige. Table 1-1 (next) describes the LED functions: Table 1-1 LED Functions PWR The PWR (power) LED is on when power is applied to the Prestige. SYS A steady on SYS (system) LED indicates the Prestige is on and functioning properly while an off SYS LED indicates the system is not ready or a malfunction. The system is rebooting when the SYS LED is blinking. LAN-1_10M A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent or received. LAN-1_100M A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being sent or received. LAN-2_10M A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent or received. LAN-2_100M A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being sent or received. WAN The WAN LED is on when the Prestige is connected successfully to a WAN device. The LED blinks when data is sent or received. The LED is off when the link is down. Getting to know your Prestige 1-3