ZyXEL P-1100 User Guide - Page 54
Menu 11.3 - Remote Node Network Layer, Options
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Prestige 1100 Internet Access Router The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options . Table 5-2 Remote Node TCP/IP Configuration Field Description Option Rem IP Address This shows the IP address you entered for this remote node in the previous menu, Remote Node Profile. Rem IP Subnet Mask Enter the subnet mask for the remote network. My WAN Addr Some implementations, especially the UNIX derivatives, require the WAN link to have a separate IP network number from the LAN and each end must have a unique address within the WAN network number. If this is the case, enter the IP address assigned to the WAN port of your Prestige 1100. Note that this is the address assigned to your local Prestige 1100, not the remote router. (See Figure 5-3 for an explanation of [My WAN Addr] with Sample IP Addresses) Single User Account Set this field to [Yes] to enable the Single User Account feature for your Prestige 1100. Use the space bar to toggle between [Yes] and [No]. [Yes/No] Metric The metric represents the "cost" of transmission for routing purposes. IP routing uses hop count as the measurement of cost, with a minimum of [1] for directly connected networks. Enter a number that approximates the cost for this link. The number need not be precise, but it must be between [1] and [16]. In practice, [2] or [3] is usually a good number. [1] to [15] Private This parameter determines if the Prestige 1100 will include the route to this remote node in its RIP broadcasts. If set to [Yes], this route is kept private and not included in RIP broadcast. If [No], the route to this remote node will be propagated to other hosts through RIP broadcasts. [Yes/No] 5-4 Remote Node TCP/IP Configuration