ZyXEL P-1100 User Guide - Page 58
Table 5-3 Edit IP Static Route Menu Fields
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Prestige 1100 Internet Access Router The following table describes the fields for Menu 12.1.1 - Edit IP Static Route Setup. Field Table 5-3 Edit IP Static Route Menu Fields Description Options Route # This is the index number of the route as listed in Menu 12.1 - IP Static Route Setup. Route Name Enter a descriptive name for this route. This is for identification purpose only. Active This field allows you to activate/deactivate this static [Yes]/[No] route. Destination IP Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. IP Subnet Mask Enter the subnet mask for this destination. Follow the discussion on IP subnet mask in this chapter. Gateway IP Address Enter the IP address of the gateway. The gateway is an immediate neighbor of your Prestige that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your Prestige; over WAN, the gateway must be the IP address of one of the remote nodes. Metric Same meaning as those in the Remote Node Setup. [1] to [15] Private Same meaning as those in the Remote Node Setup. [Yes]/[No] 5-8 Remote Node TCP/IP Configuration