ZyXEL P-1100 User Guide - Page 70
Remote Node Bridging Setup
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Prestige 1100 Internet Access Router From Menu 3 - Ethernet Setup, enter option 4. Bridge Setup for the appropriate LAN and Menu 3.4 Bridge Ethernet Setup displays as shown in Figure 7-1. Menu 3.4 - Bridge Ethernet Setup Bridge = No Press ENTER to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 7-1 Menu 3.5 - Bridge Ethernet Setup 7.2.1 Remote Node Bridging Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 Remote Node Profile. For bridging-related parameters, you need to configure Menu 11.3 - Remote Node Network Layer Options. To setup Menu 11.3 - Remote Node Network Layer Options shown in Figure 7-2 Menu 11.3 Remote Node Bridging Options, follow these steps: Step 1. In Menu 11.1, make sure the [Bridge] field is set to [Yes]. Step 2. Move the cursor to the [Edit IP/IPX/Bridge] field, then press the space bar to toggle and set the value to [Yes], and press [ENTER] to edit Menu 11.3 - Network Layer Options. 7-2 Bridge Setup