ZyXEL P-1100 User Guide - Page 62
IPX Ethernet Setup
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Prestige 1100 Internet Access Router 6.3 IPX Ethernet Setup From Menu 3 - Ethernet. Setup, select option 3. Novell IPX Setup from the appropriate LAN to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in Figure 6-3. Menu 3.3 - Novell IPX Ethernet Setup Seed Router= No Frame Type 802.2= Yes IPX Network #= N/A Frame Type 802.3= No IPX Network #= N/A Frame Type Ethernet II= No IPX Network #= N/A Frame Type SNAP= No IPX Network #= N/A Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup The following Table 6-1 describes the Novell IPX Ethernet Setup Menu. Table 6-1 Novell IPX Ethernet Setup Fields Field Description Options Seed Router Determine if your Prestige 1100 is to act as a seed router. Frame Type Enable/Disable the individual frame type. Remember to enable only the ones that are actually used on your network. IPX Network If your Prestige 1100 is a seed router, enter a unique network number # for each frame type enabled. [Yes/No] [802.2] [802.3] [Ethernet II] [SNAP] Press [ENTER] at the message [Press ENTER to Confirm] to save your configuration, or press [ESC] at any time to cancel. 6-4 IPX Configuration