ZyXEL P-1100 User Guide - Page 71
Menu 11.3 - Remote Node Bridging Options, Table 7-1 Remote Node Bridge Options
View all ZyXEL P-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Prestige 1100 Internet Access Router Menu 11.3 - Remote Node Network Layer Options IP Options: Rem IP Addr: Rem Subnet Mask= N/A My WAN Addr= N/A Single User Account= N/A Server IP Addr= N/A Metric= N/A Private= N/A RIP Direction= N/A Version= N/A Multicast= IGMP-v2 IP Policies= IPX Options: Rem LAN Net #= 00000000 My WAN Net #= 00000000 Hop Count= 1 Tick Count= 2 W/D Spoofing(min)= 3 SAP/RIP Timeout(min)= 3 Bridge Options: Ethernet Addr Timeout(min)= 0 Enter here to CONFIRM or ESC to CANCEL: Figure 7-2 Menu 11.3 - Remote Node Bridging Options Table 7-1 describes the bridging-dependent parameters in the Remote Node Profile and Network Layers menus. Table 7-1 Remote Node Bridge Options Field Description Bridge (Menu 11) Make sure this field is set to [Yes]. Edit IP/IPX/Bridge (Menu 11) Press the space bar to change it to [Yes] and press [ENTER] to go to the Network Layer Options Menu. Ethernet Addr Timeout (min) (Menu 11.3 above) In this field, enter the time (number of minutes) that you wish your Prestige 1100 to retain the Ethernet Addr information in its internal tables while the line is down. If this information is retained, your Prestige 1100 will not have to recompile the tables when the line is brought back up. Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to Menu 11.1. Then press [ENTER] at the message [Press ENTER to Confirm...] to save your configuration, or press [ESC] to cancel. Bridge Setup 7-3