ZyXEL P-661H-D1 User Guide - Page 100
MSCHAP, Use Static IP Address, Bridge, WAN Service, Apply
View all ZyXEL P-661H-D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 5 Broadband Table 8 Broadband Add/Edit: Routing- PPPoA Label DESCRIPTION Authentication Method The ZyXEL Device supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is readily available on more platforms. Use the drop-down list box to select an authentication protocol for outgoing calls. Options are: AUTO: Your ZyXEL Device accepts either CHAP or PAP when requested by this remote node. PAP: Your ZyXEL Device accepts PAP only. CHAP: Your ZyXEL Device accepts CHAP only. Use Static IP Address IP Address Routing Feature NAT Enable IGMP Proxy Enable MSCHAP: Your ZyXEL Device accepts MSCHAP only. MS-CHAP is the Microsoft version of the CHAP. A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. Select this if you do not have a dynamic IP address. Enter the static IP address provided by your ISP. You will only see this field if you select Use Static IP Address Select this option to activate NAT on this connection. Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. Select this option to have the ZyXEL Device act as an IGMP proxy on this connection. This allows the ZyXEL Device to get subscribing information and maintain a joined member list for each multicast group. It can reduce multicast traffic significantly. Apply as Default Select this option to have the ZyXEL Device use the WAN interface of Gateway this connection as the system default gateway. DNS Server - This section is not available when you select Bridge in the WAN Service Type field. Obtain DNS info Select this to have the ZyXEL Device get the DNS server addresses Automatically from the ISP automatically. Use the following Select this to have the ZyXEL Device use the DNS server addresses Static DNS IP you configure manually. Address Primary DNS Enter the first DNS server address assigned by the ISP. Server Secondary DNS Server Enter the second DNS server address assigned by the ISP. Apply Click Apply to save your changes. Back Click Back to return to the previous screen. 100 P-661HNU-Fx User's Guide