ZyXEL WRE2205 User Guide - Page 30
Wireless Client, WRE2205 - installation
View all ZyXEL WRE2205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 5 Tutorials 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into WRE2205's Web Configurator and navigate to the Network > Wireless LAN > WPS Station screen. 5 In the WRE2205's Web Configurator, select Registrar in Config Mode and then press Start PBC. Note: Your WRE2205 has a WPS button located on its panel, as well as a Start PBC button in the Web Configurator. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WRE2205 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WRE2205 securely. The following figure shows an example of how to set up wireless network and security by pressing a button on both WRE2205 and wireless client (the NWD210N in this example). Figure 17 Example WPS Process: PBC Method Wireless Client WRE2205 WITHIN 2 MINUTES SECURITY INFO COMMUNICATION 30 WRE2205 User's Guide