ZyXEL WRE2205 User Guide - Page 46
Quality of Service QoS Screen, WPS Screen
View all ZyXEL WRE2205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 6 Wireless LAN Table 15 Network > Wireless LAN > Advanced (continued) LABEL DESCRIPTION Preamble Type A preamble affects the timing in your wireless network. There are two preamble modes: long and short. If a device uses a different preamble mode than the WRE2205 does, it cannot communicate with the WRE2205. Tx Power This field controls the transmission power of the WRE2205. When using the WRE2205 with a notebook computer, select a lower transmission power level when you are close to the AP in order to conserve battery power. Apply Click Apply to save your changes to the WRE2205. Reset Click Reset to reload the previous configuration for this screen. 6.7 Quality of Service (QoS) Screen Use the QoS screen to enable Wifi MultiMedia Quality of Service (WMM QoS). WMM QoS prioritizes traffic using pre-defined voice, video, best-effort and background priorities. Click Network > Wireless LAN > QoS. The following screen appears. Figure 32 Network > Wireless LAN > QoS The following table describes the labels in this screen. Table 16 Network > Wireless LAN > QoS LABEL DESCRIPTION WMM QoS Policy Enable this to have the WRE2205 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. Apply Click Apply to save your changes to the WRE2205. 6.8 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab. 46 WRE2205 User's Guide