Home » ZyXEL Manuals » Wireless » ZyXEL WRE2205 » Manual Viewer

ZyXEL WRE2205 User Guide - Page 51

Overview, What You Need To Know, LAN IP Screen

Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

CHAPTER 7 LAN 7.1 Overview This screen allows you to assign the WRE2205 a fixed or dynamic IP address. The default IP address is 192.168.1.2. In initial configuration, the WRE2205 acts as a DHCP server, so it can assign your computer an IP address in the same network range as the default IP. After the WRE2205 connects to an AP, the DHCP server function is disabled and your computer gets its IP from the AP. If the AP connection is dropped, connect to the WRE2205 again using the default domain name, http://zyxelsetupxxxx where xxxx is the last four numbers of the MAC address. The MAC address can be found on a label on the product. 7.2 What You Need To Know The LAN parameters of the WRE2205 are preset in the factory with the following values: • IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits) 7.3 LAN IP Screen Use this screen to change your basic LAN settings. Click Network > LAN. Figure 36 Network > LAN > IP WRE2205 User's Guide 51

Section	Page
WRE2205	1
Contents Overview	3
Table of Contents	4
User’s Guide	7
Introduction	9
1.1 Overview	9
1.2 Securing the WRE2205	10
1.3 Front Panel	10
1.4 The WPS Button	11
1.4.1 WiFi Protected Setup	11
The Web Configurator	13
2.1 Overview	13
2.2 Accessing the Web Configurator	13
2.3 Resetting the WRE2205	14
Connection Wizard	15
3.1 Overview	15
3.2 Configuring LAN TCP/IP	15
3.3 Configuring the WRE2205 for Connection to an AP	16
3.3.1 Selecting Automatically Detected AP Parameters	16
3.3.2 Manually Configuring AP Parameters	19
3.4 Completing the Connection Wizard	20
Status	23
4.1 WRE2205 Status	23
4.1.1 Summary: Packet Statistics	25
4.1.2 Summary: WLAN Station Status	25
4.2 Navigation Panel	26
Tutorials	29
5.1 Overview	29
5.2 Connecting a Wireless Client using WPS	29
5.2.1 Push Button Configuration (PBC)	29
5.2.2 PIN Configuration	31
5.3 Connecting the WRE2205 to an AP	32
5.3.1 Connecting to an AP with the WPS PBC Method	33
5.3.2 Connecting to an AP with the WPS PIN Method	34
5.3.3 Selecting an AP from an Automatically Detected List	35
5.3.4 Selecting an AP by Manually Entering Security Information	37
Technical Reference	39
Wireless LAN	41
6.1 Overview	41
6.2 What You Can Do	41
6.3 What You Should Know	41
6.3.1 Wireless Security Overview	42
6.4 General Wireless LAN Screen	43
6.5 MAC Address List	44
6.6 Wireless LAN Advanced Screen	45
6.7 Quality of Service (QoS) Screen	46
6.8 WPS Screen	46
6.9 WPS Station Screen	47
6.10 AP Select Screen	48
LAN	51
7.1 Overview	51
7.2 What You Need To Know	51
7.3 LAN IP Screen	51
System	53
8.1 Overview	53
8.2 What You Can Do	53
8.3 System Password Screen	53
Tools	55
9.1 Overview	55
9.2 What You Can Do	55
9.3 Firmware Upload Screen	55
9.4 Configuration Screen	56
9.4.1 Backup Configuration	57
9.4.2 Restore Configuration	57
9.4.3 Back to Factory Defaults	58
9.5 Restart Screen	58
9.6 LED Screen	58
Troubleshooting	61
10.1 Power, Hardware Connections, and LEDs	61
10.2 WRE2205 Access and Login	62
10.3 Internet Access	63
10.4 Resetting the WRE2205 to Its Factory Defaults	65
10.5 Wireless Problems	65
Legal Information	67

Match case Limit results 1 per page

WRE2205 User’s Guide

HAPTER

LAN

7.1

Overview

This screen allows you to assign the WRE2205 a fixed or dynamic IP address. The default IP

address is 192.168.1.2. In initial configuration, the WRE2205 acts as a DHCP server, so it can

assign your computer an IP address in the same network range as the default IP. After the

WRE2205 connects to an AP, the DHCP server function is disabled and your computer gets its IP

from the AP. If the AP connection is dropped, connect to the WRE2205 again using the default

domain name, http://zyxelsetupxxxx where xxxx is the last four numbers of the MAC address. The

MAC address can be found on a label on the product.

7.2

What You Need To Know

The LAN parameters of the WRE2205 are preset in the factory with the following values:

•

IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)

7.3

LAN IP Screen

Use this screen to change your basic LAN settings. Click

Network

LAN

Figure 36

Network > LAN > IP