ZyXEL WRE2205 User Guide - Page 58
Restart Screen, LED Screen
View all ZyXEL WRE2205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 9 Tools Figure 43 Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default WRE2205 IP address (192.168.1.2). Refer to your operating system's help files for details on how to set up your computer's IP address. 9.4.3 Back to Factory Defaults Pressing the Reset button on the Maintenance > Tools > Configuration screen clears all userentered configuration information and returns the WRE2205 to its factory defaults. You can also press the WPS button on the front panel for more than 10 seconds to reset the factory defaults of your WRE2205. Refer to Section 2.3 on page 14 for more information on the resetting the WRE2205. 9.5 Restart Screen System restart allows you to reboot the WRE2205 without turning the power off. Click Maintenance > Tools > Restart. Click Restart to have the WRE2205 reboot. This does not affect the WRE2205's configuration. Figure 44 Maintenance > Tools > Restart 9.6 LED Screen Click Maintenance > Tools > LED. Use this screen to configure which LEDs are enabled or disabled. Figure 45 Maintenance > Tools > LED 58 WRE2205 User's Guide