ZyXEL XGS4700-48F User Guide - Page 267

Chapter 26 IP Source Guard new static binding replaces the original one. To open this screen, click Advanced Application > IP Source Guard > Static Binding. Figure 123 IP Source Guard Static Binding The following table describes the labels in this screen. Table 78 IP Source Guard Static Binding LABEL MAC Address IP Address VLAN Port Add Cancel Clear Index MAC Address IP Address Lease Type DESCRIPTION Enter the source MAC address in the binding. Enter the IP address assigned to the MAC address in the binding. Enter the source VLAN ID in the binding. Specify the port(s) in the binding. If this binding has one port, select the first radio button and enter the port number in the field to the right. If this binding applies to all ports, select Any. Click this to create the specified static binding or to update an existing one. Click this to reset the values above based on the last selected static binding or, if not applicable, to clear the fields above. Click Clear to reset the fields to the factory defaults. This field displays a sequential number for each binding. This field displays the source MAC address in the binding. This field displays the IP address assigned to the MAC address in the binding. This field displays how long the binding is valid. This field displays how the Switch learned the binding. VLAN Port static: This binding was learned from information provided manually by an administrator. This field displays the source VLAN ID in the binding. This field displays the port number in the binding. If this field is blank, the binding applies to all ports. XGS4700-48F User's Guide 267