ZyXEL XGS4700-48F User Guide - Page 388
Load Factory Default, Save Configuration
View all ZyXEL XGS4700-48F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 388 highlights
Chapter 44 Maintenance Table 140 Management > Maintenance (continued) LABEL Save Configurati on Reboot System DESCRIPTION Click Config 1 to save the current configuration settings to Configuration 1 on the Switch. Click Config 2 to save the current configuration settings to Configuration 2 on the Switch. Click Config 1 to reboot the system and load Configuration 1 on the Switch. Click Config 2 to reboot the system and load Configuration 2 on the Switch. Note: Make sure to click the Save button in any screen to save your settings to the current configuration on the Switch. 44.2 Load Factory Default Follow the steps below to reset the Switch back to the factory defaults. 1 In the Maintenance screen, click the Click Here button next to Load Factory Default to clear all Switch configuration information you configured and return to the factory defaults. 2 Click OK to reset all Switch configurations to the factory defaults. Figure 214 Load Factory Default: Start 3 In the web configurator, click the Save button to make the changes take effect. If you want to access the Switch web configurator again, you may need to change the IP address of your computer to be in the same subnet as that of the default Switch IP address (192.168.1.1). 44.3 Save Configuration Click Config 1 to save the current configuration settings permanently to configuration one on the Switch. 388 XGS4700-48F User's Guide