ZyXEL XGS4700-48F User Guide - Page 450
Switch Access and Login
View all ZyXEL XGS4700-48F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
Chapter 54 Troubleshooting 1 Turn the Switch off and on (in DC models or if the DC power supply is connected in AC/DC models). 2 Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC power supply is connected in AC/DC models). 3 If the problem continues, contact the vendor. One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 3.4 on page 52. 2 Check the hardware connections. See Section 3.1 on page 41. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Turn the Switch off and on (in DC models or if the DC power supply is connected in AC/DC models). 5 Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC power supply is connected in AC/DC models). 6 If the problem continues, contact the vendor. 54.2 Switch Access and Login I forgot the IP address for the Switch. 1 The default in-band IP address is 192.168.1.1. 2 Use the console port to log in to the Switch. 3 Use the MGMT port to log in to the Switch, the default IP address of the MGMT port is 192.168.0.1. 4 If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 62. 450 XGS4700-48F User's Guide