ZyXEL ZyWALL USG 2000 User Guide - Page 105

Chapter 6 Configuration Basics subscription to update the anti-virus and IDP/application patrol signatures You must have Internet access to myZyXEL.com. MENU ITEM(S) Configuration > Licensing > Update PREREQUISITES Registration (for anti-virus and IDP/application patrol), Internet access to myZyXEL.com 6.5.4 Interface See Section 6.2 on page 96 for background information. Note: When you create an interface, there is no security applied on it until you assign it to a zone. Most of the features that use interfaces support Ethernet, PPPoE/PPTP, cellular, VLAN, and bridge interfaces. MENU ITEM(S) Configuration > Network > Interface (except Network > Interface > Trunk) PREREQUISITES Port groups (configured in the Interface > Port Grouping screen) WHERE USED Zones, trunks, IPSec VPN, device HA, DDNS, policy routes, static routes, HTTP redirect, NAT, application patrol Example: Interface ge1 is in the LAN zone and uses a private IP address. To configure ge1's settings, click Network > Interface > Ethernet and then ge1's Edit icon. 6.5.5 Trunks Use trunks to set up load balancing using two or more interfaces. MENU ITEM(S) Configuration > Network > Interface > Trunk PREREQUISITES Interfaces WHERE USED Policy routes Example: See Chapter 7 on page 119. 6.5.6 Policy Routes Use policy routes to override the ZyWALL's default routing behavior in order to send packets through the appropriate interface or VPN tunnel. You can also use policy routes for bandwidth management (out of the ZyWALL), port triggering, ZyWALL USG 2000 User's Guide 105