ZyXEL ZyWALL USG 2000 User Guide - Page 320

Chapter 13 Interfaces 13.7.1 Bridge Summary This screen lists every bridge interface and virtual interface created on top of bridge interfaces. To access this screen, click Configuration > Network > Interface > Bridge. Figure 261 Configuration > Network > Interface > Bridge Each field is described in the following table. Table 71 Configuration > Network > Interface > Bridge LABEL DESCRIPTION Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. Activate To turn on an entry, select it and click Activate. Inactivate To turn off an entry, select it and click Inactivate. Create Virtual Interface To open the screen where you can create a virtual interface, select an interface and click Create Virtual Interface. Object References Select an entry and click Object References to open a screen that shows which settings use the entry. See Section 13.3.2 on page 291 for an example. # This field is a sequential value, and it is not associated with any interface. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Name This field displays the name of the interface. IP Address This field displays the current IP address of the interface. If the IP address is 0.0.0.0, the interface does not have an IP address yet. Member Apply Reset This screen also shows whether the IP address is a static IP address (STATIC) or dynamically assigned (DHCP). IP addresses are always static in virtual interfaces. This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It is blank for virtual interfaces. Click Apply to save your changes back to the ZyWALL. Click Reset to return the screen to its last-saved settings. 320 ZyWALL USG 2000 User's Guide