ZyXEL ZyWALL USG 2000 User Guide - Page 679
Configuration > Device HA > Legacy Mode continued
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 679 highlights
Chapter 39 Device HA Table 181 Configuration > Device HA > Legacy Mode (continued) LABEL DESCRIPTION Remove Select an entry and click this to delete it. Activate To turn on an entry, select it and click Activate. Activating a VRRP group has the ZyWALL monitor the connection of the group's interface. Each interface must have a static IP address and be connected to the same subnet as the group's interface on the other ZyWALL. Inactivate To turn off an entry, select it and click Inactivate. # This is the entry's index number in the list. Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is inactive. Name This field displays the name of the VRRP group. Interface This field displays which interface is part of the virtual router. Role This field displays which role the interface plays in the virtual router. Master - This interface is the master interface in the virtual router. The interface always uses its static IP address, not the management IP address of the VRRP group. Backup - This interface is a backup interface in the virtual router. The interface may use its static IP address or the management IP address of the VRRP group, depending on whether or not the backup has become the master. VRID This field displays the virtual router ID number. Virtual Router IP This is the interface's IP address and subnet mask in the virtual router. / Netmask Management IP This field displays the management IP address and subnet mask of an / Netmask interface. Synchronization Server Address Enter the IP address or Fully-Qualified Domain Name (FQDN) of the ZyWALL from which to get configuration and subscription service updates (for services to which the backup ZyWALL is subscribed). Usually, you should enter the IP address or FQDN of a virtual router on a secure network. Sync. Now This displays if the ZyWALL is set to use legacy mode device HA and device HA is enabled. Click this to copy the specified ZyWALL's configuration. Server Port Enter the port number that the ZyWALL you specified in the Server Address field uses for Secure FTP. Every ZyWALL in the virtual router must use the same port number. If the master ZyWALL changes, you have to manually change this port number in the backups. Password Enter the password used to verify other ZyWALLs during synchronization. This password is different than the one that is used for authentication in the VRRP group. Every ZyWALL in the virtual router must use the same password. If you leave this field blank in the master ZyWALL, it does not allow any backup ZyWALLs to synchronize from it. If you leave this field blank in a backup ZyWALL, it cannot synchronize from the master ZyWALL. ZyWALL USG 2000 User's Guide 679