ZyXEL ZyWALL USG 2000 User Guide - Page 706

Chapter 41 Addresses • RANGE - a range address is defined by a Starting IP Address and an Ending IP Address. • SUBNET - a network address is defined by a Network IP address and Netmask subnet mask. The Address screen provides a summary of all addresses in the ZyWALL. To access this screen, click Configuration > Object > Address > Address. Click a column's heading cell to sort the table entries by that column's criteria. Click the heading cell again to reverse the sort order. Figure 469 Configuration > Object > Address > Address The following table describes the labels in this screen. See Section 41.2.1 on page 707 for more information as well. Table 192 Configuration > Object > Address > Address LABEL DESCRIPTION Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. Object References Select an entry and click Object References to open a screen that shows which settings use the entry. See Section 13.3.2 on page 291 for an example. # This field is a sequential value, and it is not associated with a specific address. Name This field displays the configured name of each address object. Type This field displays the type of each address object. "INTERFACE" means the object uses the settings of one of the ZyWALL's interfaces. Address This field displays the IP addresses represented by each address object. If the object's settings are based on one of the ZyWALL's interfaces, the name of the interface displays first followed by the object's current address settings. 706 ZyWALL USG 2000 User's Guide