ZyXEL ZyWALL USG 2000 User Guide - Page 382

Chapter 18 DDNS Note: Record your DDNS account's user name, password, and domain name to use to configure the ZyWALL. After, you configure the ZyWALL, it automatically sends updated IP addresses to the DDNS service provider, which helps redirect traffic accordingly. Finding Out More See Section 6.5.9 on page 107 for related information on these screens. 18.2 The DDNS Screen The DDNS screen provides a summary of all DDNS domain names and their configuration. In addition, this screen allows you to add new domain names, edit the configuration for existing domain names, and delete domain names. Click Configuration > Network > DDNS to open the following screen. Figure 288 Configuration > Network > DDNS 382 The following table describes the labels in this screen. Table 95 Configuration > Network > DDNS LABEL DESCRIPTION Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. Activate To turn on an entry, select it and click Activate. Inactivate To turn off an entry, select it and click Inactivate. # This is the number of an individual DDNS profile. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Profile Name This field displays the descriptive profile name for this entry. DDNS Type This field displays which DDNS service you are using. Domain Name This field displays each domain name the ZyWALL can route. ZyWALL USG 2000 User's Guide